(1) Flushing function  Flushing is the most basic function of the mechanical seal system, and it is also the most common method of the mechanical seal system. It is directed to the high-pressure

At present, mechanical seals are widely used in pump products, and with the improvement of product technology and energy-saving requirements, the application prospect of pump mechanical seals will be

Application of pump mechanical seal under high temperature medium:Now, pump mechanical seals are developing towards high parameters (high temperature, high pressure, high speed and large shaft

Mechanical seals consist of a rotating element and a stationary element, each with a lapped, precision-smooth mating face (see Figure 1). Seal performance is determined primarily by the condition of

1. Improper assembly of mechanical sealWhen replacing the mechanical seal at the non power end, the O-ring on the moving ring was not assembled properly during the assembly process. The O-ring should

At present, the main failure modes of bellows mechanical seal and its auxiliary system are as follows:(1) Seal failure caused by the failure or breakage of bellows seal failure caused by the failure

 The mechanical seal system includes:① mechanical Seals are divided into: single seal, double seal, multiple seal or combination seal, etc.;② Seal type and model;③ mechanical Seal

   In recent years, with the rapid development of modern engineering, mechanical seals for various purposes, such as high-temperature seal, low-temperature seal, ultra-low temperature seal,

1.The larger the spring compression, the better the sealing effect. In fact, if the spring compression is too large, it can cause the friction pair to wear rapidly and instantaneously burn out;

Mechanical seals are classified as one of the basic components of precision and complex structure. They are the key components of various pumps, reaction kettles, turbine compressors, submersible