SeccoMix 481 Agitator Mechanical Seal



| Pressure p1 | vacuum ... 6 bar (87 PSI) |
|---|---|
| Sliding velocity vg | 0 ... 2 m/s (0 ... 6 ft/s) |
| Design | Agitator |
| Standard | FDA |
1. Product overview
SeccoMix 481 — Agitator Single Mechanical Seal for Agitator & Mixer Shaft sizes by shaft size. Face, seat and elastomer combinations selected for your medium, temperature and pressure. Factory direct, drawing / sample customization accepted. MOQ 1 set — sample and single-set orders welcome; lead time 7-10 days.
2. Operating limits
Shaft diameter d1: confirm at quotation
Pressure p1: vacuum ... 6 bar (87 PSI)
Temperature t: confirm at quotation
Sliding velocity vg: 0 ... 2 m/s (0 ... 6 ft/s)
| Pressure p1 | vacuum ... 6 bar (87 PSI) |
|---|---|
| Sliding velocity vg | 0 ... 2 m/s (0 ... 6 ft/s) |
| Design | Agitator |
| Standard | FDA |
3. Dimensions and drawings
Section drawing, installation dimensions and alternative seat types are shown in the product images. Full dimension table available as PDF on request.
4. Materials of construction
Seal face: Carbon graphite, FDA conform Seat: Silicon carbide, FDA conform Secondary seals and metal parts according to application and customer's specifications. Standards and approvals • FDA • ATEX • DIN 28138 (mechanical seals for agitator shafts) • DIN 281
5. Cross-reference / equivalent model codes
Alternative model designations / cross-reference codes (model codes only, no brand prefix): SeccoMix 481 — also known as: SeccoMix 481, BGM481, BGM481F, BGM481-D, SECCOMIX481N, SECCOMIX481F, SECCOMIX481D Interchangeability reference (equivalent / compatible replacement only). Same seal type appears under different model codes across manufacturers and in different material or structural variants; the codes above are provided for selection convenience only. EGERSEAL is an independent manufacturer. These are compatibility references — not original equipment parts, and no affiliation with any named brand is claimed. Always verify shaft size, seat type, installation length and material code before replacement.
All alias codes: SeccoMix 481 / BGM481 / BGM481F / BGM481-D / SECCOMIX481N / SECCOMIX481F / SECCOMIX481D
6. Installation and maintenance
Verify shaft size, seat bore and installation length; check rotation direction and spring working length; clean and lubricate O-rings; keep faces free of grit. We have been manufacturing and repairing mechanical seals since 2007 (nearly 20 years).
7. Quality and certification
Material certificates and dimensional inspection reports are available on request. Quality management: this product is manufactured under an ISO 9001 certified quality management system. A copy of the certificate can be provided on request for your target market. We only state certifications we can actually provide; API 682 / ATEX / FDA are not claimed.
8. Factory capability
EGERSEAL is a mechanical seal manufacturer and repair workshop based in Zhejiang, China. Founded in 2007, we have nearly 20 years of experience in manufacturing and repairing mechanical seals. Around 45% of our output is exported to customers in 23 countries.
9. Commercial terms and FAQ
MOQ 1 set; US$35 / US$22 / US$18 per set for 1+ / 10+ / 50+ sets; lead time 7-10 days; packing, CIF/DDP and warranty confirmed at quotation. Q: Can you match a different model code? — Yes, see the alternative model codes list; send the code you use.
What operating conditions does the SeccoMix 481 mechanical seal cover?
Shaft , pressure vacuum ... 6 bar (87 PSI), temperature , sliding velocity 0 ... 2 m/s (0 ... 6 ft/s), Agitator design, to FDA. Typical duty: chemical process pumps, refining, pulp and paper, water and waste water.
Which model codes are interchangeable with SeccoMix 481?
Cross-reference codes: BGM481, BGM481F, BGM481-D, SECCOMIX481N, SECCOMIX481F, SECCOMIX481D. Different manufacturers use different codes for the same seal type; confirm shaft size, installed length and face materials before ordering.
Can you customize to drawing or sample, and what is the MOQ?
Yes. Face, seat and elastomer materials can be specified to drawing or sample. MOQ 1 set, lead time 7-10 days; packing, CIF/DDP and warranty confirmed at quotation.
Browse all models
All mechanical seal models A-Z | Back to Mixer Reactor Agitator Seals
