E-mail: sales@egerseal.com Tel: +86-13666783111
Home > News > How To Tell The Quality Of The Bearings

How To Tell The Quality Of The Bearings

Aug 18, 2021

To identify the quality of equipment bearings, we usually proceed from the following aspects:

Whether the outer packing is clear:

Under normal circumstances, the brands produced by regular manufacturers have their own special designers for external packaging design, and arrange the production conditions of the factory for production, therefore, the product packaging should be very clear from lines to color blocks, without ambiguity.


Whether the steel seal is clear:

Each bearing product will be printed with its brand words, labels and so on on the bearing product body. Although the font is very small, but the regular manufacturers of products are using steel printing technology printing, and in the process of pressing before overheating, so the font although small, but concave deep, very clear. But usually, the font of counterfeit products is not only fuzzy, because the printing technology is rough, the font is floating on the surface, some can even be easily wiped by hand or manual traces are serious.


Whether there is noise:

The left hand holds the inner sleeve of the bearing, the right hand toggle the jacket to make it rotate, and listen to whether there is any noise in the process of bearing operation. Due to the backward production conditions of most counterfeit products, completely manual workshop operation, in the production process, the bearing body will inevitably be mixed with dust, sand and other impurities, so when the bearing rotates, there will be noise or operation is not smooth. This point is the key to determine whether the product is manufactured by a reputable manufacturer with strict manufacturing standards and operated by machines.


Whether there are cloudy oil stains on the surface:

Whether there are muddy oil stains on the surface requires our special attention when buying imported bearings. Because of the current anti-rust technology in China and foreign advanced manufacturing countries there is a certain gap, so it is easy to leave a thick oil mark when the bearing body is anticorrosive. It feels sticky and thick when it is contacted by hand, and the bearings imported from abroad can hardly see any traces of anti-rust oil. According to insiders, especially careful people can smell a special taste on imported bearings, which is the taste of anti-rust oil.


Whether the chamfering is even:

The so-called bearing chamfering, that is, the intersection of the horizontal and vertical surface, counterfeit bearing products due to the limitations of production technology, in these corners of the parts of the processing is not satisfactory, which we can easily identify.


Need help with seal selection?

Tell us your pump model or working conditions.

Contact Us